当前位置：网站首页 > 人员构成 > 在校教师 > 李翔宇
李翔宇

个人简介

        李翔宇, 副研究员/博士，IEEE Member, 中国密码学会会员, 中国计算机学会会员。

        1977年生，2000年获得清华大学电子工程系微电子与固体电子学学士学位，2006年获清华大学微电子学研究所工学博士学位，毕业后赴比利时微电子研究中心进修，同年6月进入清华大学微电子学研究所任教。主要研究信息安全VLSI、高能效智能传感器信号与数据处理芯片，共发表学术论文近60篇，第一或通信作者SCI论文4篇，申请国家发明专利9项，授权7项，计算机软件著作权3项，获北京市科技进步一等奖1项，教育部科技进步一等奖1项、国家密码管理局党政机要密码科技进步奖（省部级）三等奖1项。“清华大学精品课”《数字大规模集成电路设计》主讲教师，曾获清华大学“青年教师教学优秀奖”、清华大学“良师益友”称号。

出版物

所发表的论文：

[1] Yunlan Xu, Xiangyu Li, Gesture detection scheme and hardware design for dual detection of moving and static targets, Vol.63, No.8, pp.1192-1198, 2023.

[2] Yifu Zhao, Shujuan Yin, Wei Tao, Xiangyu Li, Jie Meng, Gesture Recognition System Resilient to Interdevice Interference Based on Direct Sequence Spread Spectrum, IEEE Sensors Letters, Vol.7, No.5, pp.2475-1472, 2023.

[3] Pixi Kang, Xiangyu Li, STAR: An STGCN ARchitecture for Skeleton-Based Human Action Recognition, IEEE Transactions on Circuits and Systems I: Regular Papers, Vol.70, No.6, pp.2370-2383, 2023.

[4] Xu Cheng, Xiangyu Li, High Frequency Audio Devices Based Inaudible Ultrasonic Hand Tracking System Using Subspace Method, 2023 IEEE SENSORS, pp.1-4, 2023.

[5] Pixi Kang, Lingfeng Gao, Xiangyu Li, Bayesian Filter-Based Ultrasonic Continuous Hand Gesture Recognition for Low-Resource Platform, 2023 IEEE SENSORS, pp.1-4, 2023.

[6] Jie Meng, Xiangyu Li, Shujuan Yin, Modeling and Signal Processing for Direct Sequence Spread Spectrum Intelligent Radars, Telecommunication Engineerin, Vol.62, No.11, pp.1614-1621, 2022.

[7] Pixi Kang, Xiangyu Li, Lightweight Online Semisupervised Learning for Ultrasonic Radar-Based Dynamic Hand Gesture Recognition, IEEE Sensors Journal, Vol.23, No.3, pp.2707-2717, 2022.

[8] Xiangyu Li, Gongning Luo, Wei Wang, Kuanquan Wang, Yue Gao, Shuo Li, Hematoma Expansion Context Guided Intracranial Hemorrhage Segmentation and Uncertainty Estimation, IEEE Journal of Biomedical and Health Informatics, Vol.26, No.3, pp.1140-1151, 2022.

[9] Yuankun Wei, Ziyu Fu, Debing Zhang, Guangqi Wang, Chun Zhang, Xiang Xie, Xiangyu Li, A Registration Method for Total Knee Arthroplasty Surgical Robot, ITOEC 2022, pp.535-538, 2022.

[10] Zeliang Zhao, Xin Wu, Dengjie Wang, Ziqiang Wang, Chun Zhang, Xiangyu Li, Zhihua Wang, A 40 Gbps PAM-4 Receiver with 12-Tap Direct Decision Feedback Equalizer Employing 1.5-stage Slicers in 65-nm CMOS, ICTA 2022, pp.230-231, 2022.

[11] Feifei Zhou,Xiangyu Li,Zhihua Wang, Efficient High Cross-User Recognition Rate Ultrasonic Hand Gesture Recognition System, IEEE Sensors Journal, Vol.20, No.22, pp. 13501 - 13510, 2020.

[12] Xiangyu Li,Nijie Xie, Multi-algorithm Fusion Framework for Energy Prediction of Energy Harvesting IoT Node and Implementation, Chinese Journal of Electronics, Vol.29, No.5, pp. 952 - 958, 2020.

[13] Feifei Zhou,Xiangyu Li,Zhihua Wang, Efficiently User-Independent Ultrasonic-Based Gesture Recognition Algorithm, IEEE SENSORS 2019, pp. 1 - 4, 2019.

[14] Zhonghan Zhang,Yancao Jiang,Chenyu Zhang,Chun Zhang,Xiangyu Li, The Optimization of Localization and Navigation for Vision-based Robot, ICTA 2019, pp. 180 - 181, 2019.

[15] Yu Zhao,Xiangyu Li,Shujuan Yin, Reconfigurable Parser for Software Defined Network L4 Ethernet Switch Chip, ICTA 2019, pp. 81 - 82, 2019.

[16] Mengyao Zhang,Xiangyu Li, An Efficient Real-Time Two-Dimensional CA-CFAR Hardware Engine, EDSSC 2019, pp. 1 - 3, 2019.

[17] Wenhuan Luan,Xiangyu Li,Dengjie Wang,Ziqiang Wang,Xin Lin,Mao Li, A 1.25-8.5 Gb/s wide range CDR with locking detector in 40 nm CMOS technology, EDSSC 2019, pp. 1 - 3, 2019.

[18] Xiangyu Li,Nijie Xie, Multi-Model Fusion Harvested Energy Prediction Method for Energy Harvesting WSN Node, EDSSC 2018, pp. 1 - 2, 2018.

[19] Xinhan Lin,Shouyi Yin,Fengbin Tu,Leibo Liu,Xiangyu Li,Shaojun Wei, LCP: a Layer Clusters Paralleling mapping method for accelerating Inception and Residual networks on FPGA, DAC 2018, pp. 1 - 6, 2018.

[20] Shun Lei,Xiangyu Li,Yafei Liu, Soft-Edge error-detecting flip-flop for lowering error-correction-rate under ultra-low voltage, EDSSC 2017, pp. 1 - 2, 2017.

[21] Yanting Ren,Liji Wu,Hexin Li,Xiangyu Li,Xiangmin Zhang,An Wang,Hongyi Chen, Key recovery against 3DES in CPU smart card based on improved correlation power analysis, Tsinghua Science and Technology, Vol.21, No.2, pp. 210 - 220, 2016.

[22] Yonghong Bai,Liji Wu,Xingjun Wu,Xiangyu Li,Xiangmin Zhang,Beibei Wang, PUF based encryption method for IC cards on-chip memories, Electronics Letters, Vol.52, No.20, pp. 1671 - 1673, 2016.

[23] Kun Gu,Liji Wu,Xiangyu Li,Xiangmin Zhang, Design and implementation of an electromagnetic analysis system for smart cards, CIS 2011, pp. 653 - 656, 2011.

[24] Cong Chen,Xiangyu Li,Liji Wu,Xiangmin Zhang, Design and implementation of a Differential Power Analysis System for cryptographic devices, ICSICT 2010, pp. 1967 - 1969, 2010.

所持专利：

[1] 李翔宇，赵颖渊. 基于硬件安全标签的动态信息流追踪处理器结构: 中国, 202210112760.6[P].

[2] 李翔宇，阮冶，陈书贤. 动态手写签名识别方法、装置及电子设备: 中国, 202111667092.5[P].

[3] 李翔宇，康丕熙. 用于雷达姿势识别的在线半监督学习分类器及其分类方法: 中国, 202111265556.X[P].

[4] 李翔宇. 在传输过程中提取流数据特征的流处理器及其实现方法: 中国, 202110433608.3[P]. 2022-10-04.

[5] 李翔宇，郑小敏. 手势识别方法及相关设备: 中国, 202010774742.5[P].

[6] 乌力吉，吴健，张向民，李翔宇，王德伟. 一种存储路径上主动防御硬件木马的系统及方法: 中国, 202010294220.5[P].

[7] 李翔宇. 一种可扩展的可重构交换机包解析器基本处理单元结构: 中国, 201911126256.6[P]. 2020-11-27.

[8] 李翔宇，周飞飞. 一种用于手势识别的特征预对齐的随机森林分类器及分类方法: 中国, 201910381675.8[P]. 2021-05-28.

[9] 李翔宇，杨芳. 一种可破坏硬件木马的可重构交换机转发引擎解析器: 中国, 201910003982.2[P]. 2020-05-12.

[10] 乌力吉，李唐盛晟，李翔宇，张向民，吴行军. 一种适用于高速数据传输通路的加密和解密方法: 中国, 201811103211.2[P]. 2020-06-02.

[11] 李翔宇,肖显峰,刘永昌. 一种嵌入式系统的兼容式加速器扩展方案: 中国, 201610192047.1[P]. 2019-01-29.

[12] 李翔宇,马江莎. 基于蒙哥马利模乘的Tate对算法及其硬件结构: 中国, 201510419816.2[P]. 2018-02-16.

[13] 殷树娟(校外),李翔宇,吕易俗. 一种接口适配器及与Wishbone兼容的裁剪方法: 中国, 201310750197.6[P]. 2018-10-19.

[14] 李翔宇,王飞宇. 功耗感知的功耗平衡S盒单元电路及其应用方法: 中国, 201110296995.7[P]. 2014-09-24.

[15] 李翔宇,孙义和,俞波. 动态数据流结构中存储-匹配-转发单元电路: 中国, 200910093721.0[P]. 2012-05-22.

加入ICAS之前的论文：